Wooden door advice

Why is your wooden door sticking?

Changes in humidity, a sagging door or reduced clearance above the floor could be the cause. Before you start sanding, find out exactly where the door is catching and when the problem began.

The same symptom does not always mean the same fault. The checks below will help you describe the problem, but cannot establish the right repair without inspecting the door.

01 / Contact points

First, find out where the door is catching

Slowly open and partially close the door, without forcing it past any resistance. Check whether it touches the floor, threshold or door frame. Scuffed edges, marks on the floor and a comparison of the gaps around the closed door can help.

  • Contact at the bottom corner on the handle side may be linked to a sagging door or the condition of the hinges.
  • A door catching on the side or top of the door frame may indicate a change in the door’s dimensions or position.
  • Resistance at just one point as the door opens may be caused by a local uneven patch in the floor or an obstruction.

If the door only squeaks but does not catch anywhere, that is a different symptom. Lubrication alone will not fix a door that is resting on the floor.

02 / Environmental changes

Wood can respond to humidity

Wood absorbs and releases moisture, which can cause its dimensions to change. The gap between a wooden door and its door frame may therefore vary throughout the year. The door’s construction and finish also play a part.

Consider whether the sticking began during wetter weather, after decorating or following other work involving moisture. It also matters whether the problem returns at a particular time of year or gradually gets worse regardless of the season.

Do not rush into sanding. If your wooden door has swollen temporarily, removing material without careful consideration could leave too large a gap once the moisture level falls. Any source of moisture needs addressing, rather than simply altering the door.

03 / Bottom edge

Is your wooden door rubbing on the floor?

If the problem began after fitting a new floor, adding a carpet or replacing the threshold, the original clearance under the door may have been reduced. First, check that it is not simply a doormat or some debris getting in the way.

If the floor has not changed, look at the gaps around the door and the visible condition of the hinges. An uneven gap may suggest that the door has shifted. On its own, however, this is not enough to decide how to repair it.

Trimming the bottom edge is not a universal solution. Without knowing how the door is constructed, it is not possible to safely determine how much material can be removed, or whether trimming is suitable at all.

04 / Next steps

How to fix a sticking wooden door: where to start

Start with checks that do not involve taking anything apart. Remove loose obstructions, inspect the contact points and note when the problem appeared. If the door is difficult to move, do not force it shut.

Do not start adjusting hinges or sanding without understanding the cause. Different door constructions need different approaches, and altering the wrong area could make the door harder to close or damage its finish.

It is worth discussing a repair with a joiner, especially if the hinges are visibly loose, the door is damaged, the problem keeps returning or the door cannot be opened and closed normally.

In short: first, identify where the door catches and whether this is linked to changes in the environment or flooring. Only then does it make sense to decide what work is needed. A sticking door does not automatically need trimming.

Wooden door repairs

Tell us where your door is catching

At the Dřevo Brno joinery workshop, we also repair wooden doors. Tell us what the problem is, when it started and whether it followed a change of flooring or other alterations. Your description will help guide our next discussion.